Managing Incoming Calls - Audiovox BT1611i Owner's Manual

Pairing the Bluetooth system
with your Mobile Phone and
Head Unit
1. Press and hold the D (display) button (9)
to access the MENU.
the first option on the menu.
2. Press the AUDIO CONTROL button (4) to
initiate the pairing process. Keep the
mobile phone within 2 meters of the unit
during pairing.
3. Refer to the instructions that came with
your mobile phone to activate the
Bluetooth function and search for devices.
4. Select "BT60" from the pairing list on the
mobile phone.
5. Enter "1234" as the password.
• If pairing is successful, the display
will show
• If pairing fails,
flashed on the display for 3 seconds,
and then the unit will revert to the
previous operation automatically. If
pairing fails, repeat the above steps.
NOTE: During Pairing, only the Power,
Volume +/-, B (Clear) and Mute keys are
functional. Other keys are disabled during
pairing mode.
Reconnecting
Automatic Re-connection
The unit has a built-in Auto Re-connection
function. When a paired phone is in range, the
head unit will automatically reconnect with the
is
mobile phone when the ignition key is turned on
(only if the mobile phone was previously paired
with the head unit). The unit will also
automatically reconnect when attempting to dial
a call through the head unit.
Manual Re-connection
Under the following conditions, you may need
to reconnect manually:
• If the mobile phone is out of range (more
than 2 meters from the head unit).
• If the connection is lost and while talking
. on the phone (or there is an incoming call)
more than 2 meters from the head unit.
is
• When doing an audio transfer from the
phone back to the head unit.
To manually reconnect with the paired phone,
perform the following steps:
1. Press and hold the D (display) button (9)
to access the MENU.
2. Press the D button again to select the
• The LCD displays
during the re-connection period.
• If the re-connection is successful, the
LCD Display displays
Disconnecting the Phone from
the Head Unit
To manually disconnect with the paired phone,
perform the following steps:
1.
2.
3.

Managing Incoming Calls

When there is an incoming call, the LCD will
option.
display the Caller ID. If the incoming call has no
caller ID, the LCD will display "PHONE IN".
24
and returns to the
previous mode.
• If the re-connection fails, the LCD
displays
automatically returns to the previous
mode.
Press and hold the D (display) button (9)
to access the MENU.
Press the D button again to select the
option.
Turn the AUDIO CONTROL (3) to select
.
• The LCD displays
during the
disconnection period.
• If the disconnection is successful, the
LCD Display displays
and returns to the
previous mode.
BT1611i
and