Bluetooth Operation - Audiovox BT1611i Owner's Manual

BT1611i

BLUETOOTH OPERATION

Before attempting to use the Bluetooth
functions on the BT1611i, please make sure
your mobile phone supports Bluetooth functions
(Headset or Handsfree profiles or both). Adhere
to the following guidelines for successful
operation.
• Before using Bluetooth functions, you
must pair your mobile phone to the
BT1611i head unit. (See "Pairing the
Bluetooth system with your Mobile Phone
and Head Unit" on page 24.) To ensure the
best reception for pairing and re-
connection, please make sure the phone
battery is fully charged before you begin.
• Try to perform pairing within a few minutes
of the phone being turned on.
• Once the unit has been paired with the
phone, "BT60" will be displayed on the
mobile phone.
• To achieve the best performance, always
keep the mobile phone within 3 meters of
the head unit.
• Always keep a clear path between the
mobile phone and the head unit. Never
place a metal object or any other obstacle
between the mobile phone and the head
unit.
• Some mobile phones (like Sony Ericsson)
may have a "Power Saving Mode" option.
PLEASE DO NOT use the Power saving
Mode with the BT1611i.
• Before accepting or making a call, make
sure your mobile phone's "Bluetooth
function" is turned on.
• To ensure the best conversation quality/
performance, stay within one meter of the
head unit when talking.
• To "disconnect" the mobile phone from the
head unit, turn the Bluetooth connectivity
off on the mobile phone or use the DIS-
CONN (disconnect) feature under the
System Menu (see "RE-CONN/DIS-
CONN" on page 8).
• While talking in Telephone mode, it is
recommended that you set the main
volume level below "30". A higher volume
setting may create an unwanted echo in
the vehicle that can feed back into the
microphone.
• If you have difficulty pairing or the
Bluetooth operation is not functioning
properly, you can try a "soft reset" by
removing the front panel (see "Front Panel
Release" on page 9) and waiting 1 minute.
If after reattaching the panel, operation
has not resumed normally, you can
perform a complete system Reset (see
"Reset Button" on page 10).
23