File Management - Audiovox BT1611i Owner's Manual

To stop recording before the file is complete,
press the Record button. The LCD will display
(or CARD) and the
incomplete track will be deleted from the
destination folder.
NOTE: Never remove a USB device during
recording or music transfer. This may
damage the device or cause the system to
lock up. Do not switch modes or turn the
radio power or ignition off while recording.
Transferring MP3/WMA Music
Your BT1611i is equipped with a Music Transfer
feature that allows you to record music from
various sources to an SD/MMC card or USB
device. To Transfer music, perform the
following steps:
1. Play the media from which you would like
to record.
2. Press the RECORD button (20) to activate
the Transfer feature.
3. Turn the AUDIO CONTROL (3) to select
the USB or CARD (SD/MMC) source.
4. Press the AUDIO CONTROL button (4) to
begin recording.
• The unit will begin recording the
current file, starting at the beginning
of the track. The LCD will display
stop at the end of the file.
• The recorded information is stored in
a folder named "MY_MP3" or
"MY_WMA" on the destination
source.
• Recording will stop and the unit will
display "Memory Full" if the selected
storage device is full.
To stop recording before the file is complete,
press the Record button. The LCD will display
incomplete track will be deleted from the
destination folder.
NOTE: When recording from CD the song is
played from beginning to end. When
copying a MP3 or WMA file from any source
the file is simply copied and stored, not
played like CD.
Erasing Recorded Files
You can erase recorded files from a USB
device or SD/MMC card while the file is playing,
or after selecting the file in Number Search or
Navigation Search mode. To erase a file,
perform the following steps:
1. Press and hold the BAND button (5) to
activate the Erase function. The LCD will
display
2. Press the AUDIO CONTROL button (4) to
. Recording will
select Erase mode.
(or CARD) and the
.
20
3. Turn the AUDIO CONTROL (3) and select
to erase (or select to cancel the
erase function).
4. Press the AUDIO CONTROL button to
confirm. The file will stop playback (if
playing) and will be erased. When
finished, the system will display
.

File Management

Music recorded or transferred using the
BT1611i will be stored in the default folders
listed below:
• MY_CD: Music Recorded from a CD.
• MY_MP3: Transferred MP3 files.
• MY_WMA: Transferred WMA files.
Recorded/transferred music is stored in the
corresponding folder and given the following
naming convention: "XX0001.MP3", where XX
is the name of the source (i.e. CD0001.MP3).
NOTE: MY_ AUX, MY_FM, MY_iPod, and
MY_XM are set up on the destination source
(SD, USB) as well as the above mentioned;
however, these sources are not applicable
for this model.
BT1611i