Ipod Operation - Audiovox BT1611i Owner's Manual

BT1611i

IPOD OPERATION

Accessing iPod Mode
This unit is equipped with an iPod ready
function that will allow you to control and charge
your iPod (if compatible) using the front panel
control buttons. The following iPod versions are
supported:
• iPod 3G (Firmware version 2.2 only)
• iPod 4G
• iPod Mini
• iPod Photo
• iPod Nano
• iPod 5G (Video)
The unit will automatically switch to iPod mode
when an iPod is plugged into the iPod cable.
8 Din iPod Ready Cable
HEAD UNIT
iPod iPod iPod iPod
photo mini nano
iPod Cable
To return to the iPod menu from any other
source menu, press the MODE button (2) on
the front panel or remote control until "iPod"
appears on the display.
NOTE: The BT1611i will not select video
files regardless of whether or not a video file
was the last file playing when the iPod was
plugged into the radio. Only music files are
supported.
5 20
SUB
1 4 3 2
21
Turning the iPod On/Off
The iPod power turns on automatically when
the iPod is connected to 30-pin iPod cable, as
long as the automobile ignition is turned on.
You can turn the iPod off by disconnecting it
from the cable or by turning the ignition off.
When the ignition is turned off, the iPod will
pause and then enter sleep mode after 2
minutes. The iPod cannot be turned on/off from
the iPod itself while connected.
21
BT1611I MP3/WMA RECEIVER
RECORD
BASS
INT
17 23 24 25 26 27
14 12
7
TUNE
/
AUX IN
MENU
13
28 9 19