Automatic Message Sending - Vaisala PWD22/52 User Manual

USER'S GUIDE____________________________________________________________________
NOTE
54 __________________________________________________________________ M210543EN-E
The examples illustrate message 7 when using PWD22. The maximum
visibility varies according to the product model. The messages are
otherwise identical.

Automatic Message Sending

In the automatic (CLOSEd) mode PWD22/52 sends the predefined
message at selected intervals. Automatic message is selected with the
AMES command.
AMES Message_number Message_interval
where
Message_number
Message_interval
See the example below:
AMES 0 60
Selects message number 0 to be sent once in a minute.
Messages can also be displayed in the command mode with the MES
command, described in section MES on page 58.
= Valid range 0 ... 7. Selects the corresponding
message. Any negative message number is
converted to 0. If only the message number is
given, the previous message interval setting is
used.
= Given in multiples of 15 s (= measuring
interval). Therefore, intervals 15, 30, 45... are
valid. Other intervals are converted to
multiples of 15 s. Maximum sending interval is
255 s (4 min 15 s).