Weather Related Commands; Wpar; Wset - Vaisala PWD22/52 User Manual

Chapter 5 ________________________________________________________________ Operation
VAISALA _______________________________________________________________________ 59

Weather Related Commands

The following commands are used to display/set the weather analysis
parameters and results.

- WPAR

Weather parameter message

- WSET

PRW reference values
- CLRS Clear precipitation sums
WPAR
The WPAR command displays the present weather analysis parameters.
WEATHER PARAMETERS
PRECIPITATION LIMIT
WEATHER UPDATE DELAY
RAIN INTENSITY SCALE
HEAVY RAIN LIMIT
LIGHT RAIN LIMIT
SNOW LIMIT
HEAVY SNOW LIMIT
LIGHT SNOW LIMIT
DRD SCALE
DRD DRY OFFSET
DRD WET SCALE
WSET
The WSET command is used to modify the present weather analysis
parameters.
The WSET command asks for one parameter at a time, showing the
parameter name and the current setting. The current value is accepted by
pressing ENTER. A new value can be given by typing the value before
pressing ENTER. The output is as follows:
SET PRESENT WEATHER PARAMETERS
PRECIPITATION LIMIT ( 40)
WEATHER UPDATE DELAY ( 6)
SYNOP HAZE LIMIT ( 10000)
METAR HAZE LIMIT ( 5000)
RAIN INTENSITY SCALE ( 1.00)
HEAVY RAIN LIMIT ( 8)
LIGHT RAIN LIMIT ( 2)
SNOW LIMIT ( 5.0)
40
6
1.00
8.0
2.0
5.0
600
1200
1.0
809.5
0.0017