Casio 5602 Operation Manual page 40

Q2
I can't connect while my phone is in
the Airplane Mode.
Connection with the watch is not possible
while the phone is in the Airplane Mode. After
exiting the phone's Airplane Mode, go to the
Home Screen and tap the "PRO TREK
Connected" icon. Then on the watch, hold
down (B) for at least two seconds until the
second hand points to [R] twice.
Q3
I changed the phone's Bluetooth
from enabled to disabled, and now I
can't connect anymore.
On the phone, turn Bluetooth off and then back
on, and then tap the "PRO TREK Connected"
icon on the Home Screen. Then on the watch,
hold down (B) for at least two seconds until the
second hand points to [R] twice.
Q4
I can't connect after turning off the
phone.
Turn on the phone and then tap the "PRO
TREK Connected" icon. Then on the watch,
hold down (B) for at least two seconds until the
second hand points to [R] twice.
Operation Guide 5602
Phone-Watch Connection
Q1
I can't establish a connection
between the phone and watch.
Have you tried turning your phone off and
then back on again?
Turn the phone off and then back on, and
then tap the "PRO TREK Connected"
icon. Then on the watch, hold down (B) for
at least two seconds until the second hand
points to [R] twice.
Has the watch been re-paired with the
phone?
After deleting pairing information from
PRO TREK Connected, re-pair them.
Unpairing
l
Pair the watch with a phone.
l C
If you are unable to establish a
connection...
Use the procedure below to delete the
pairing information from the watch, and
then re-pair the watch and phone.
Hold down (D) for at least two
A
seconds to enter the Timekeeping
Mode.
Hold down (E) for at least two
B
seconds. Release the button when
the name of the currently selected
Home City appears on the display.
Press (E) to cause the seconds digits
C
to flash.
Hold down (A) for at least two
D
seconds. Release when [PAIR CLR]
stops flashing. This deletes the
pairing information from the watch.
Press (E) to return to the
E
Timekeeping Mode.
Changing to a Different
Phone Model
Q1
Connecting the current watch to
another phone.
Pair the watch with the phone.
If you purchase another phone
l
Auto Time Adjustment by
Bluetooth Connection (Time
Adjustment)
Q1
When does the watch adjust is time?
The watch will connect with the phone and
perform auto time adjustment at around 12:30
a.m., 6:30 a.m., 12:30 p.m. and 6:30 p.m. The
connection is automatically terminated after
auto time adjustment is complete.
Q2
Auto time adjustment is performed,
but the time setting is not correct.
Is auto time adjustment not being
performed according to its normal
schedule?
Note that auto time adjustment is not
performed for 24 hours after swapping of
the Home Time and World Time, or after
the time setting is adjusted manually on
the watch. Auto time adjustment will
resume 24 hours after either of the above
operations is performed.
Is auto time adjustment enabled?
Auto time adjustment will not be
performed at the scheduled times unless
it is enabled. Enable auto time
adjustment.
Using the Watch in a Medical Facility or
l
Aircraft
Q3
Time is not displayed correctly.
If your phone is unable to receive a signal
because you are outside its service range or
for some other reason, the watch may not be
able to display the correct time. If this
happens, connect the phone to its network
and then adjust the time setting.
40