Casio 5602 Operation Manual page 39

Stopping Radio Wave Emission by This
●
Watch
The watch is emitting radio waves whenever
the second hand is pointing to [R] or [C].
Also, the watch connects with a phone
automatically as described below.
Auto adjust (4 times/day)
●
When in a hospital, on an aircraft, or in any
other area where the use of radio waves is not
allowed, use the operation below to stop radio
wave generation.
Stopping Radio Wave Generation
●
Press any button besides (L) to terminate
the Bluetooth connection.
Connected Disconnected
Disabling Auto Time Adjustment
●
Configure PRO TREK Connected settings
to disable time adjustment between the
watch and phone.
Using PRO TREK Connected to Disable
l
Auto Time Adjustment
Copyrights and Registered
Copyrights
The Bluetooth ® word mark and logos are
●
registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such
marks by CASIO Computer Co., Ltd. is
under license.
iPhone and App Store are trademarks of
●
Apple Inc. in the United States and other
countries.
iOS is a trademark or registered trademark
●
of Cisco Systems, Inc.
GALAXY is a registered trademark of
●
Samsung Electronics Co., Ltd.
Android and Google Play TM are trademarks
●
or registered trademarks of Google LLC.
Other company names and product names
●
used herein are trademarks or registered
trademarks of their respective companies.
Operation Guide 5602
Troubleshooting
I can't pair the watch with a
phone.
Q1
I've never been able to establish a
(pairing) connection between the
watch and phone.
Are you using a supported phone model?
Check if the phone model and its
operating system are supported by the
watch.
For information about supported phone
models, visit the CASIO Website.
https://world.casio.com/os_mobile/wat/
Did you install PRO TREK Connected on
your phone?
PRO TREK Connected needs to be
installed on your phone in order to
connect with the watch.
Install the required app on your
l A
phone.
Are your phone's Bluetooth settings
configured correctly?
Configure the phone's Bluetooth settings.
For details about setting procedures, see
your phone documentation.
iPhone Users
"Settings"
n
●
"Settings"
n
●
Sharing" "PRO TREK Connected"
n
On
Android Users
Enable Bluetooth.
●
Other than the above.
Some phones need to have BT Smart
disabled to use PRO TREK Connected.
For details about setting procedures, see
your phone documentation.
On the Home Screen, tap: "Menu"
"Settings" "Bluetooth"
n
"BT Smart settings"
"Bluetooth" On
n
"Privacy" "Bluetooth
n
n
n
"Menu"
n n
"Disable".
n
I can't reconnect the watch
and phone.
Q1
The watch will not re-connect with the
phone after they are disconnected.
Is PRO TREK Connected running?
The watch cannot re-connect with the
phone unless PRO TREK Connected is
running on the phone. On the phone's
Home Screen, tap the "PRO TREK
Connected" icon. Then on the watch, hold
down (B) for at least two seconds until the
second hand points to [R] twice.
Have you tried turning your phone off and
then back on again?
Turn the phone off and then back on, and
then tap the "PRO TREK Connected"
icon. Then on the watch, hold down (B) for
at least two seconds until the second hand
points to [R] twice.
Is a timer countdown operation in
progress?
Connection with a phone is not possible
while there is 30 seconds or less
remaining on a countdown timer
operation. Stop the countdown operation
before connecting with the phone.
39