Casio 5602 Operation Manual page 33

Note
If (alarm) is still displayed, it
●
means that another alarm is still turned
on. To turn off all of the alarms, repeat
steps 2 and 3 until the
indicator is no longer displayed.
World Time
World Time lets you look up the current time
in any one of 38 cities around the globe, and
UTC (Coordinated Universal Time).
Note
World Time cities that can be selected
●
only by using PRO TREK Connected
cannot be selected using watch
operations.
Configuring World Time Settings
l
Checking World Time
1.
Enter the World Time Mode.
Navigating Between Modes
l
After the currently selected World Time
City name appears, the watch will display
the current time in that city.
You can display the World Time City
●
while in the World Time Mode by
pressing (E).
World Time City
World Time
Operation Guide 5602
Specifying a World Time City
Use the procedure in this section to select a
World Time city. If you are in an area that
observes summer time, you can also enable
or disable summer time.
(alarm)
Note
The initial factory default summer time
●
setting for all cities is [AUTO]. In many
cases, the [AUTO] setting lets you use
the watch without switching between
summer time and standard time.
1.
Enter the World Time Mode.
Navigating Between Modes
l
2.
Use (A) and (C) to display the city you
want.
3.
To change the summer time setting, hold
down (E) for at least two seconds.
Release the button when [AUTO], [OFF],
or [ON] starts to flash.
4.
Use (C) to change the summer time
setting.
Each press of (C) cycles through settings
in the sequence shown below.
[AUTO]
●
The watch switches between standard
time and summer time automatically.
[OFF]
●
The watch always indicates standard
time.
[ON]
●
The watch always indicates summer
time.
5.
Press (E) to complete the setting
operation.
Note
While [UTC] is selected as the city, you
●
will not be able to change or check the
summer time setting.
If you select a World Time City with
●
PRO TREK Connected and then
change to a different city with a watch
operation, the PRO TREK Connected
city information is deleted from the
watch.
Configuring World Time Settings
l
Swapping Your Home Time
and World Time
In the World Time Mode, hold down (L) for at
least two seconds until
flash and the hands start to move.
This will swap your Home City Time and World
Time.
Before swapping After swapping
Home Time World Time
World Time Home Time
Note
This function comes in handy when
●
you need to move to another time
zone. For details about how to use it,
go to the section below.
Moving to Another Time Zone
l
Specifying UTC
(Coordinated Universal
Time) as Your World Time
City
In the World Time Mode, pressing (A) and (C)
at the same time will set UTC (Coordinated
Universal Time) as the World Time City and
display its current time.
starts to
33