Correcting The Filling Quantity For Long Service Hoses; Replacing The Printer Paper - Waeco AirConServiceCenter ASC 1300 G Operating Manual

AirCon Service Center
9.8 Correcting the filling quantity for long service
hoses
I
NOTE
 If longer or shorter service hoses are required for the device, you
need to adjust the filling quantities to the new hose lengths.
 The service hoses for the high and low pressure sides must always
be of the same length, as otherwise the filling quantities will not be
correctly measured.
1. In the basic menu, use the cursor keys  or  to select "Other
selections":
2. Press ENTER to confirm.
3. Use the cursor keys  or  to select "Service":
4. Press ENTER to confirm.
5. Enter the password "7732".
6. Enter the hose length in centimetres.
7. Press ENTER to confirm.
9.9

Replacing the printer paper

1. To replace the printer paper roll (14), open the cover (K).
2. Insert the new paper roll and close the cover (K).
EN
Short selection
Free selection
Other selections
ENTER-OK
Int. vessel filling
Flushing
Reset scales.
Service.
K
Service tasks
127