Start Speechexec; Create A User Profile - Philips SpeechMike Classic User Manual

the USB port is enabled in the BIOS of the
system. See the hardware documentation
for details or contact your hardware vendor.
Restart the PC when prompted by
4
Windows.
Insert the installation CD for SpeechExec
5
in the CD-ROM drive. The set-up program
should start automatically. If it does not,
open the CD contents in Windows Explorer
and double-click the autorun.exe file.
Click the Install button.
6
Follow the on-screen instructions of the
7
set-up program to install SpeechExec on the
PC.
3.3

Start SpeechExec

To manually start the program, open the
Windows start menu in Windows and select
Programs > SpeechExec (Pro)
option to start the program automatically was
selected in the settings menu, start the program
by clicking the icon in the notification area of
the Windows task bar.
3.4

Create a user profile

When using SpeechExec
wizard guides you through the step-by-step
configuration process to create a new user
profile and configure your initial key settings.
Follow the on-screen instructions to:
• specify an author name that will be used to
identify your dictations
• define the name and the (network) path
6
Dictate. If the
for the first time, a
where your finished dictations will be stored
• set the default Work type
report) assigned to new dictations
• start another wizard to configure a Digital
Pocket Memo. See
Configuration Wizard
information.
E Tip
If working in a network, select a folder on
a mapped network drive to store finished
dictations. Transcriptionists will then be able to
access the folder and map their pending folders
to your finished dictations
D Note
It is possible to change these settings later using
the Settings menu. See
for more information.
(letter, memo, fax or
Digital Pocket Memo
on page 17 for more
folder.
Settings menu on page 17
User manual