Stand/ version 07.08.2002 Geprüft/ approved WAT/MZE Operating instruction General information prior to installation Description and functions The types WRG80, WRG100, WRG125 and The operating range is defined as follows: WRG200(CWT) are used for guiding counterweight frames. Max. nominal speed 2,5m/s WRG80 Weight (4 pcs.)
• using unsuitable accessories, spare parts or The WITTUR guarantee may be voided if parts operating material which has neither been re- other than those described in these instructions leased by the WITTUR Company nor consists of are installed.
Blatt/ sheet D625MGB.004 Isolated Roller Guides Shoes Datum/ date 07.08.2002 WRG80, WRG100, WRG125, WRG200 Stand/ version 07.08.2002 Geprüft/ approved WAT/MZE Operating instruction Content of delivery On receipt of the delivery, the goods or compo- Especially compare article number, quantity and nents should be checked for correctness and com- type specification with the ordering data.
Blatt/ sheet D625MGB.005 Isolated Roller Guides Shoes Datum/ date 07.08.2002 WRG80, WRG100, WRG125, WRG200 Stand/ version 07.08.2002 Geprüft/ approved WAT/MZE Operating instruction Installation Adjustment of the position of the roller guides The installation could be done during counter- weight frame assembling or also afterwards if the elevator is to be modernised.
Page 7
Blatt/ sheet D625MGB.006 Isolated Roller Guides Shoes Datum/ date 07.08.2002 WRG80, WRG100, WRG125, WRG200 Stand/ version 07.08.2002 Geprüft/ approved WAT/MZE Operating instruction Alignment of the roller guide • Align the roller guides in relation to the guide rails so that the requirements shown in chapter 2.1 are...
Page 8
Blatt/ sheet D625MGB.007 Isolated Roller Guides Shoes Datum/ date 07.08.2002 WRG80, WRG100, WRG125, WRG200 Stand/ version 07.08.2002 Geprüft/ approved WAT/MZE Operating instruction Factory settings of the movement limiter and the spring tension The spring tension and the movement lim- iter gap are adjusted at the factory - it is...
Page 9
Blatt/ sheet D625MGB.008 Isolated Roller Guides Shoes Datum/ date 07.08.2002 WRG80, WRG100, WRG125, WRG200 Stand/ version 07.08.2002 Geprüft/ approved WAT/MZE Operating instruction WRG100 & WRG125 • The right spring tension equals 35mm spring 1. Spring 2. Adjusting nut length 3. Lock nut 4.
Page 10
Blatt/ sheet D625MGB.009 Isolated Roller Guides Shoes Datum/ date 07.08.2002 WRG80, WRG100, WRG125, WRG200 Stand/ version 07.08.2002 Geprüft/ approved WAT/MZE Operating instruction WRG200 (CWT) • The right spring tension equals 3 turns of the adjusting nut (1) • The movement limiter gap is 4 mm Änderungen vorbehalten!
Blatt/ sheet D625MGB.010 Isolated Roller Guides Shoes Datum/ date 07.08.2002 WRG80, WRG100, WRG125, WRG200 Stand/ version 07.08.2002 Geprüft/ approved WAT/MZE Operating instruction Function testing Provided that the system has been properly Test run after installation: installed in accordance with all guidelines, it can...
The adjustment is right, if the roller can be irregularities arise which could possibly turned easily by hand. impair operational safety. Please contact us at WITTUR if you have • Check the locking of the lock nuts any problems or queries.
Only use WITTUR spare parts. Repairs should be expertly carried out with Please contact WITTUR if for any reason something utmost care in order to guarantee safe is unclear, or you encounter damage that cannot installation operation.
Need help?
Do you have a question about the WRG80 and is the answer not in the manual?
Questions and answers