Scope Of Delivery; Installation - Alpha-InnoTec LWC Series Operating Manual

scope of delivery

example of scope of delivery:
compact unit with
• completely hermetically enclosed
compressor, all safety-related
components for monitoring
of the cooling circuit
• electric switch cabinet with power
contactor and soft starter
• sensors mounted in the unit
for monitoring hot gas-,
heating water forward flow and
return flow temperatures
• hose for condensate discharge
(connected to heat pump side)
• drainage hose for safety valve
(connected to heat pump side)
• outdoor sensor
• Changeover valve
domestic hot water
• with variant models that have
heat quanity recording:
with energy efficient circulating
pumps, heat quantity recording
and ventilation circuit board
(lWc 60 and lWc 80) or comfort
board (lWc 100 and lWc 120)
for the scope of delivery, see overview
"Technical data / scope of delivery".
8
proceed as follows:
Inspect delivery for outwardly visible signs of
damage.
check to make sure that delivery is complete...
Any defects or incorrect deliveries must be claimed
immediately.
overview "Technical data / scope of delivery".
aCCessories neCessary for operation
CautIon.
use only original accessories from the
manufacturer of the unit.
Air ducts (with air duct accessories) must be ordered
separately.

installation

observe the following when performing work:
notICe.
always comply with applicable accident
prevention regulations, statutory regula-
tions, ordinances and directives.
WarnIng!
the heat pump or heat pump system
may be installed and assembled only by a
qualified technician!
notICe.
observe the sound levels of the respective
model.
overview "Technical data / scope of delivery",
"Sound" section.
We reserve the right to modify technical specifications without prior notice.
UK830504/210627 © Alpha-InnoTec GmbH