• Android
• Apple iOS (Note that USB is not supported, it is only possible to connect via Bluetooth)
• MacOs
• Windows (Note that Bluetooth is not supported, it is only possible to connect via USB)
The VictronConnect App can connect to the solar charger via its built-in Bluetooth.
The VictronConnect App can connect to the solar charger via the
VictronConnect App connection via USB using a VE.Direct USB interface
The VictronConnect App can connect remotely to the solar charger via a
the internet using the
VRM
portal.
VictronConnect App connection via LAN or the internet (VRM portal) using a GX device (for example a Cerbo GX)
3.6. Display
There are a number of display options:
• The
VictronConnect App
• A
GX device
• The
VRM Portal
(GX device or
• The
SmartSolar Control display
• The
MPPT Control
- an external display that connects to the VE.Direct port (the VE.Direct cable is not included with the MPPT
Control)
Page 5
MPPT solar charger manual
Where to download the VictronConnect App from
VictronConnect App connection via built-in Bluetooth
GlobalLink 520
needed)
- an external display that plugs into the front of the solar charger
VE.Direct USB
interface.
GX device
connected to the same local network or via
Features