Before You Start; Important Notice - Tecnotion UC Series Installing

TECNOTION
Chapter
Ch

1.1. Important notice

DOCUMENT NR 4022.363.4197.1

1. Before you start

Please read the following instructions very carefully. They are important
for a safe and warranted installation and operation of the Linear Motor.
Before installing and using the Linear Motor, read this
instruction manual carefully. The manufacturer declines all
responsibility in case of accident or damage due to
negligence or lack of observance of the instructions
described in this manual. The manufacturer also declines all
responsibility in case of accident or damage in conditions
that differ from those indicated in the manual; Tecnotion also
declines all responsibility for damage caused by improper
use of the Linear Motor.
Handle the components of the Linear Motor with care,
packed as well as unpacked. Especially the magnet yokes
are sensitive to mechanical shocks. Never drop a magnet
yoke or release it in an uncontrolled way.
Do not expose the magnets to temperatures higher than
70° C. The magnets may be demagnetized at higher
temperatures.
Unpack the Linear Motor and check its integrity. If there is
any irregularity, contact the dealer or manufacturer,
signalling the nature of the defects.
Make a note of the serial number. This facilitates the
correspondence with the supplier.
INSTALLING IRONLESS LINEAR MOTORS
3
BEFORE YOU START