Table of Contents
Advertisement
TECNOTION
3.1. Installation order
DOCUMENT NR 4022.363.4197.1
Figure 5: Ironless linear motor system
Coil unit
S lide
Figure 6: Coil unit, slide, magnet yoke and mounting surface, schematically
The installation order of this instruction manual must be
followed. A different order may cause damage to your
machine.
Before installing the Linear Motor components, the installation of the
mounting frame should be completed. The slide should be provided
with bearings, dampers, linear probe and required cabling in such a
way that a smooth, save and well positioned transport of the slide over
the stroke is established. The ruler should be properly positioned and
fixed to the frame. The operation of bearings and dampers should be
tested as well as the guidance of the moving cables.
The correct installation order is for electrical safety reasons:
INSTALLING IRONLESS LINEAR MOTORS
Y oke
Magnet
Mounting surface
for magnet track
12
INSTALLATION
Advertisement
Table of Contents
Need help?
Do you have a question about the UC Series and is the answer not in the manual?
Questions and answers