Table of Contents
Advertisement
Quick Links
Read this entire installation manual to ensure proper installation. When
fi nished with the installation, fi le this manual with the owner or maintenance
department. Compliance and conformity to local codes and ordinances is
the responsibility of the installer.
Separate parts from packaging and make sure all parts are accounted for
Packing List
•
before discarding packaging material. If any parts are missing, do not begin
•
•
T H
IS
E
•
S ID
installation until you obtain the missing parts.
U P
Make sure that all water supply lines have been fl ushed and then completely
turned off before beginning installation. Debris in supply lines can cause
valves to malfunction.
Product warranties may be found under "Products" on our web site at
bradleycorp.com.
215-1681 Rev. A EN 10-07-003A
© 2010 Bradley Corporation
Page 1 of 2
IMPORTANT!
5/3/2010
Installation
Hydraulic Push Button Assembly
COMBI5100, 5600 Series (S45-732)
Anti-Ligature Flush Valve Box
HSC79 (S45-2670)
P.O. Box 309, Menomonee Falls, WI USA 53052-0309
PHONE 800.BRADLEY (800.272.3539) FAX 262.251.5817
bradleycorp.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bradley 5600 Series
Summary of Contents for Bradley 5600 Series
- Page 1 Installation Hydraulic Push Button Assembly COMBI5100, 5600 Series (S45-732) Anti-Ligature Flush Valve Box HSC79 (S45-2670) IMPORTANT! Read this entire installation manual to ensure proper installation. When fi nished with the installation, fi le this manual with the owner or maintenance Installation department.
- Page 2 After securing actuator to push rod guide, connect tubing to actuator. Connect tubing from actuator to fl ush valve per instructions included with fl ush valve prepack. Test valve for proper operation. 5/3/2010 Bradley Corporation • 215-1681 Rev. A EN 10-07-003A...
Need help?
Do you have a question about the 5600 Series and is the answer not in the manual?
Questions and answers