Accessory Management; Remote Controls; Program Remote Control - KERUI KR-K7 User Manual

Accessory Management

7.1 Remote Controls

Remote controls give the ability to remotly control the functions arm, disarm, emergency and silent.
These functions can be operated directly without having to operate the host and entering the security
code. The host can learning up to 99 different remote controls.
Note: In case when a remote control gets lost you need to delete it as soon as possible in order to
prevent others from operating your host.

Program Remote Control

On the remote control page, shown in Picture 7-1, there are 99 zones. Select a zone and press key
[ADD] at the top-right corner to enter remote control learning mode. At this moment, press any key on
the remote controller to send a signal to host. The host will sound "Learn success" which means the
remote control has been programmed to the host. If there is a voice prompt "Already programmed"
when pressing the remote control, and it means that the remote control has already been added to the
host and couldn't be programmed repeatedly.
KR-K7 User manual
Picture 7-1
13