The Remote Control - Audio Pro STEREO ONE User Manual

CONTROLS AND INDICATORS
REMOTE CONTROL
1) Power switch
Press this button to turn on the receiver, assuming
that it is in standby mode (the ace-bass indicator
LED is red). If it is not red, the receiver is off. Turn on
the receiver with the ON/OFF switch at the back of
the unit. Press the button again to put the receiver in
standby mode.
2) Sleep (automatic sleep mode)
This button automatically activates the sleep mode.
Every time this button is pressed, the shut-off time
decreases by 10 minutes (90-80-70, etc). To discon-
nect this function, press the button until it displays
OO.
3 Input (selection of audio source)
Every time this button is pressed, the audio source
– CD/Radio/AUX Line – changes. This will be indi-
cated on the display.
8
4) Numerical buttons
The numerical buttons 0-9 permit the user to select:
CD mode: track number.
Tuner mode: pre-set radio stations or numerical input
of a radio frequency
5) Repeat/Preset FM
CD mode: selection of repeat function. See separate
section on page 12.
Tuner mode: instant selection of a radio frequency.
See separate section on page 13.
6) Display
Use this button to select display mode – clock or
selected audio source. In the radio mode, the display
will also indicate the RDS function selection. See
page 14 for more information.
7) Muting
Mute the audio with this button. Press it again to
return to the previous volume level. Muting will be
indicated on the display.
8) Stop/Select FM/AM
CD mode: to stop a CD.
Tuner mode: selection of FM/stereo, FM/mono or AM.
9) Memory (accessing the memory)
Press this button to access the memory. See separate
section on page 13
10) Volume (volume control)
Press the top button to increase the volume and the
bottom one to decrease it.
11) Play/Paus
Press this button to begin playing a CD. Press it one
more time to pause the CD. Press the button again
to start playing the CD at the point at which it was
paused.
12) Search/tuning
CD mode: search forward (+) or backward (-) within a
track.
Tuner mode: automatic station search up (+) or down
(-) on the frequency scale.
13) Skip/Preset (snabbval)
CD mode: skip forward to the next track or back for
the previous one.
Tuner mode: skip forward or backward to the next
pre-set.
14 Tone/Balance
Press this button to adjust the bass/treble or the bal-
ance. See separate section on page 16
15 Menu/Set
Setting the time and timer functions. See separate
sections on pages 11 and 17.
Note:
When using the remote control, aim it at the head unit.
The battery cover is located on the back of the remote
control.