Audio Pro STEREO ONE User Manual page 7

CONTROLS AND INDICATORS
Tuner mode: turn the knob to the right to select the
next pre-set radio station. Keep turning the knob to
move through pre-sets on the radio dial. Turn the knob
to the left to select preceding pre-set radio stations.
10) Line in
An additional audio source, for example, an Mp3 or a
portable CD player, can be connected here with a 3.5
mm [1/8 inch] stereo plug. Select LINE as the audio
source with the SOURCE button (2).
11) Phones (jack for headphones)
Connect the headphones cable with a 3.5 mm [1/8
inch] plug. Once the headphones are plugged in, the
output for the speakers turns off automatically. Adjust
the volume level. NOTE! Turn down the volume before
connecting the headphones.
12) Volume
Use this knob to adjust the volume. It is ca. two full
turns from minimum to maximum volume. As the knob
is turned, the volume level is shown on the display.
VOL OO indicates minimum volume (quiet) and VOL
MAX indicates maximum volume.
13) Eject
Press this button to open or close the CD tray.
14) Window for remote control reception
To use the remote control, aim it at this window.
15) Display
Operation indicators are displayed here.
16) CD tray
Place a CD in the tray with the label face up. Open the
tray by pressing the EJECT button (13). Press it again
to close the CD tray.
17) FM/AM
Press this button to select FM/stereo, FM/mono or
AM.
18) Manual tuning
Turn this knob to search for radio stations manually.
Turn the knob to the right to go up the radio dial and
to the left to go down the dial.
19) Operating mode indicator
Indicates whether the unit is turned on (blue) or in
standby mode (red). If it is not illuminated, the receiv-
er has been turned off with the ON/OFF switch on the
back panel.
7