Security - Audio Pro STEREO ONE User Manual

SECURITY

Power source
This unit is intended for use with a 230 V AC power sup-
ply only. Connecting to a different power source may lead
to accidents or fire and can damage the unit. Check the
voltage of the power source before you connect this unit.
Power cable
This unit has a detachable power cable. Plug it into the
appropriate outlet on the back panel. Make sure that the
unit is completely turned off until all other connections
have been completed. Make sure that the power cable is
routed so that it is not pinched or in the way of foot traffic.
A damaged power cable should be replaced immediately.
Placement
Place the unit on a stable, even surface. If it is placed on
a shelf, make sure that the shelf and its brackets will be
able to bear the unit's weight. Do not place the unit in a
humid or extremely hot or cold place or on a soft surface,
such as a rug. Make sure that the unit is well-ventilated.
We recommend at least 10 cm [four inches] of space on
all sides, as well as on top. See the figure below. In order
to insure that the unit is always properly ventilated, never
cover the ventilation holes in the cabinet.
Cleaning
Before cleaning, disconnect the power cable. The unit
can be cleaned with a soft cloth. Never use strong sol-
.
vents or other liquids
Water and humidity
Do not use the unit near water (for example, a bathtub,
bathroom or kitchen sink), damp basements, wet rooms,
or a swimming pool.
Temperature
Do not use the unit in extremely high or low temperatures.
The ideal temperature is above +5º C [41º F].
Cabinet
Do not open the unit's cabinet. There are no parts inside
the cabinet that you can repair yourself. Only an
authorized service technician can carry out repairs. Every
change in the product alters the terms of the warranty.
If a foreign object falls inside the cabinet, disconnect
the power cable immediately and contact an authorized
service center.
Abnormal odor
If the unit emits an abnormal odor or smoke, turn it off im-
mediately and disconnect the power cable. Contact your
retailer or the nearest service center.
Overloading
Do not overload wall outlets or the fuse box, as this can
result in a risk of fire or electric shock.
Connections
Use only the enclosed or recommended connection ca-
bles and accessories.
Replacement parts
When replacements are required, be sure to use parts
specified by the manufacturer or that have the same
properties as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
When to contact your service representative
The unit needs to be inspected by qualified service per-
sonnel if:
- The unit has been dropped on a hard surface or been
damaged in any way.
- The unit has been exposed to rain or water.
- A foreign object has fallen inside the cabinet.
- The unit is not operating properly.
- The unit's performance has become impaired.
[4 inches]
5