Timer Functions; Setting The Timer - Audio Pro STEREO ONE User Manual

TIMER FUNCTIONS

Timer
The timer can be set for one event within a 24-hour
period (ONCE) or for recurring events (EVERY DAY).
The time settings for both of these functions are
kept in memory even when they are not activated.
Both functions can be activated simultaneously.
The time settings are erased from memory if the
power switch is turned off or there is a power failure.

Setting the timer

Press the MENU button 2 times. TIMER will appear
on the display. Turn the TONE/SKIP/BAL knob to
the right or to the left to select the desired function,
ONCE or EVERYDAY. (or the PRESET buttons on
the remote control)
ONCE: Select this timer function for one occasion
during a 24-hour period.
EVERYDAY: Timer modes for recurring events.
Selecting an audio source: (I or E FUNC)
After making the above selection, press MENU and
turn the TONE/SKIP/BAL knob until the desired
audio source is displayed.(or the PRESET buttons
on the remote control)
Selection of start time: (I or E ON)
Press MENU to select a start time. Turn the TONE/
SKIP/BAL knob (or the PRESET buttons on the re-
mote control) to program the start time. The display
will show I ON for ONCE and E ON for EVERYDAY.
Selecting the stop time: (I or E OFF)
Press MENU to select a stop time. Turn the TONE/
SKIP/BAL knob (or the PRESET buttons on the
remote control) to set the stop time. The display will
show I OFF for ONCE and E OFF for EVERYDAY.
Selecting the volume for start time: (I or E VOL)
Press MENU and turn the TONE/SKIP/BAL knob
to indicate the desired volume at start time. (or the
PRESET buttons on the remote control)
Activating the timer:
Press MENU to activate the above settings. Both
ONCE (I) and EVERYDAY (E) can be activated
simultaneously or individually. Turn the TONE/SKIP/
BAL knob to activate (ON) or deactivate (--).(or the
PRESET buttons on the remote control)
Press MENU again to exit.
Example of ONCE activated and EVERYDAY not activated.
Note the following regarding the timer
Activating the timer:
Once all the timer functions have been set and are
not going to be changed, the timer can be activat-
ed immediately by pressing on the MENU button 3
times. Turn the TONE/SKIP/BAL knob to activate or
deactivate this function. See the previous section.
Deactivating the timer:
Press the MENU button 3 times. Turn the TONE/
SKIP/BAL knob to deactivate the timer.
Example: when no timer mode is activated.
Changing function or time:
If a change needs to be made, follow the instruc-
tions in the section "Setting the timer."
When selecting TUNER as an audio source:
When selecting TUNER as an audio source, also
select a radio station – either the program number
or the desired frequency.
Indication of timer function:
In standby mode, the display will indicate whether
a timer function is activated – I for ONCE and E for
EVERYDAY. If neither I nor E is displayed, the timer
function is not activated.
If the unit is turned on, then the timer function can
be shown on the display together with the clock by
pressing the DISPLAY button – I for ONCE and E
for EVERYDAY. If neither I nor E is displayed, the
timer function is not activated.
NOTE! Both functions can be activated simultane-
ously, in which case both I and E are displayed.
Always check to make sure that the unit displays
the correct time.
17