Stereo One Ace Plus Speakers - Audio Pro STEREO ONE User Manual

STEREO ONE ACE PLUS SPEAKERS

Stereo One ACE PLUS speakers
These speakers are included in the packaging. They were designed and developed to be used exclusively with the
Stereo One CD receiver. These speakers can not be connected to another amplifier. The included speaker cables
are a unique apart of the system and can not be exchanged for other cables, or either shortened or lengthened.
Thanks to Audio Pro's patented ACE BASS technology, Stereo One ACE PLUS, together with the Stereo One CD
receiver, offers a unique audio experience.
What is ACE BASS?
The laws of physics apply to the construction of ordinary speakers. As a consequence, in order for it to reproduce a
deep bass, the speaker cabinet would have to be very big. With our ace bass technology, we can "alter" the laws of
physics to make the speaker element believe that it is housed in a much bigger speaker cabinet than it is really is. In
addition, this technology also makes it possible for us to improve the unit's electronic performance and properties.
Connecting the speakers
Read more about connecting the speakers on page
10. Be careful to connect the red cable to + and the
black cable to -. Use only the included cables. They
must not be shortened or lengthened.
Note that the cables are different. The end with the
crimped fork terminals must be connected to the
speakers.
Placement
The Stereo One ACE PLUS is designed to be
placed on a stand, table, or bookshelf. If the speak-
er is placed on a bookshelf, make sure that there is
at least 10 cm [4 inches] of space in back of it.
Try to place the speaker in accordance with the
figure below. For an optimal stereo image, axis (y)
should be shorter than axis (x). For a wider stereo
image, the speakers can be turned inward slightly.
Technical data: Stereo One ACE PLUS
Type:......................2-way bass reflex, ace-bass
Armament:
Treble:.............................................1" Silk dome
Bass:...............................5 1/4" Polyglass cone
Cross-over frequency:........................3.300Hz
Frequency range:.................38Hz - 40.000Hz
Impedance:........................................ ....4 ohm
Dimensions:(WxHxD):
160 x 240 x 320mm [6x9x13 inches]
Note:
The LED on top of the speakers indicates the
ACE BASS function. Stereo One ACE PLUS
is intended for use with the Stereo One CD
receiver only.
The included cables can not be shortened,
lengthened, or otherwise altered in any way.
Use only Audio Pro original parts to replace
a speaker element or other component in
the speakers. Contact your retailer for more
information.
19