Before Connecting To Power Source - Audio Pro STEREO ONE User Manual

BEFORE CONNECTING TO POWER SOURCE

Unpacking
Carefully unpack the unit, making sure that all the accessories are included in the packaging (see below). Examine the
receiver to make sure that it has not been damaged during transport. If your unit is damaged or it does not work, inform
your dealer immediately. If the unit was delivered directly to you, contact the shipping company immediately. Only the
recipient (the person or company that received the item) can file a complaint with the shipping company regarding dam-
age incurred during transport.
Keep the box and packaging material for future shipping or transport.
Make sure you also keep these operating instructions close by for future reference.
Accessories included:
The following accessories should be included in the packaging:
Power cable
Speaker cables x 2
NOTE! THIS UNIT IS DESIGNED FOR 230-VOLT CAPACITY
4
AM antenna
FM indoor antenna
WARNING!
To eliminate the risk of electric shock, never open this unit. Do not subject it to
humidity or moisture of any kind. If the unit is not functioning properly, take it to a
qualified service technician.
A lightning bolt inside an equilateral triangle
warns the user that uninsulated voltage within the unit may have sufficient magni-
tude to cause electric shock.
An explanation point inside an equilateral triangle
alerts the user that important literature concerning the operation and mainte-
nance of this unit has been included.
Labeling on products that use lasers
(Does not apply to some countries)
The label, placed on the back panel, indicates that the products use Class 1 laser
beams. This means that there is no risk for radiation on the product's exterior.
Remote control
Instructions
Batteries x 2