Toshiba G7 Series Applications Workbook page 57

Hide thumbs Also See for G7 Series:

Introduction

This G7 Electronic Operator Interface (EOI) can be mounted remotely from the unit. This guideline

provides the information for mounting the EOI properly to avoid damage to your interface. The

mounting screw length is most critical in remote mounting the EOI. You may cause deformation of

the outer surface of the bezel if the screws used are too long. The interface can operate safely up to

distances of 15 feet via the TTL Port. For distances beyond 15 feet, it is recommended to use the

RS-485 Port.

EOI

Mounting Instructions

Parts Required

•

6-32 x 5/16 Long Pan Screw (Qty. 4 each)

•

#6 Split Lock Washer (Qty. 4 each)

•

#6 Flat Washer (Qty. 4 each)

• 1 of the following cables

CAB0011-0 (1 meter option connection cable)

CAB0013-0 (3 meter option connection cable)

CAB0015-0 (5 meter option connection cable)

For additional assistance, please contact Toshiba Adjustable Speed Drive Marketing Dept. at (800) 872-2192

efesotomasyon.com -Toshiba inverter,drive,servo,plc

Remote Mount EOI

Electronic Operator Interface

Mounting dimensions (in.)

H7 series