1MRS758405 C
4.3.6
SMU615
Installation Manual
The allowed range for the fixing screws' tightening torque is
0.7...1 Nm.
5.
Install the plug-in unit into the case.
GUID-5294C2D6-C5A0-4ABC-8E83-6888F5033B1C V1 EN
Figure 17:
Rack mounted merging unit
Wall mounting merging unit
A mounting kit is needed for wall mounting the merging unit. In addition to the
detailed mounting instructions, the wall mounting kit includes:
•
Wall mounting frame and rail parts
•
Back plate
•
Screws
•
Dimensions for screw holes
1.
Drill screw holes according to the dimensional drawing.
2.
Mount the wall mounting frame and the rails.
3.
Install the back plate.
4.
Loosen the four M5 fixing screws in the case to fit the case into the mounting
frame.
5.
Mount the case between the rails.
Section 4
Mounting
27