Driver Installation Instructions - AG Neovo TX-1502 User Manual

CHAPTER 6: APPENDIX
2. In Tablet PC Settings, tap "Calibrate the screen for pen or touch input".
3. On the Display tab, in Display options, tap "Calibrate" and then "Yes" to allow the program
to make changes.
4. Follow the on-screen instructions to calibrate the touch screen.
6.3.2

Driver Installation Instructions

If you are using a PC running Windows VISTA, XP, 2000, follow the instructions below:
1. Power on the PC.
2. Make sure the USB cable is connected from the PC to the LCD monitor.
3. Open the corresponding driver folder file.
4. Follow the step-by-step instructions as shown on the pop-up windows.
If you are using a PC running Windows
• Express:
1. Power on the computer.
2. Make sure the USB cable is connected to the computer.
3. Make sure your EWF is disabled. If your EWF is enabled, please disable the EWF by using
the EWF Manager command.
4. Once the EWF is disabled, click on the XP driver and follow the step-by-step instructions as
shown on the pop-up windows.
• Custom:
1. Power on the computer.
2. Make sure the USB cable is connected to the computer.
3. Follow the step-by-step instructions found in the driver folder file.
XP Embedded, follow the instructions below:
®
36