Hakko Electronics FX-100 Manual
  1. Manuals
  2. Brands
  3. Hakko Electronics Manuals
  4. Soldering Gun
  5. FX-100
  6. Manual

Hakko Electronics FX-100 Manual

Hide thumbs Also See for FX-100:
1
2
3
4
5
Table of Contents

Advertisement

Quick Links

Download this manual
American Hakko Products, Inc.

Menus and Settings

Now that you have a HAKKO FX-100 Soldering
Station, you may feel like you want to customize the
settings of your soldering station.
There are some options that may interest you and
your can access these through the three buttons you
see in the front of the soldering station under the

display.

Pressing any of the three buttons brings up the button
menu.
Buttons are referenced from left to right

MODE

The first button is labeled 'MODE' and allows you to change the soldering station from working in a normal
recovery mode to a 'boosted recovery mode'. This provides a little extra power to the tip and subsequently
boosts the recovery. It is a cost saving alternative to switching to a higher power tip.
While the button menu is displayed, pressing the MODE button will bring up the options for NORMAL,
BOOST, or CANCEL. You'll notice the button menu has changed and the three buttons now have new labels
indicating UP, DOWN, and OK. Press the UP or DOWN buttons to make your selection and then press OK.
When you're done, the changes will be made instantly and the soldering station display will go back to
showing you the graphic representation of the power output to the soldering iron tip.
You will notice that while in NORMAL MODE, the display will show the letter 'N' on the left-hand side of the
display. You will also notice that at idle when the soldering iron is not being used, the bar graph that
represents the power output to the soldering iron tip is 4 pixels high. If you are in BOOST MODE, the display
will show the letter 'B' on the left-hand side of the display, and the bar graph will typically be 8 pixels high.

DSP (DISPLAY)

The second button is labeled 'DSP' which is short for DISPLAY. This button controls the data you can view on
the display of the station. It is for information use only and does not affect the operation of the soldering
station. While the button menu is displayed, pressing the DSP button will bring up the options. Let's take a
look at what they are.
28920 Avenue Williams • Valencia • California 91355
Tel 661.294.0090 • Fax 661.294.0096 • www.hakkousa.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FX-100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Hakko Electronics FX-100

Summary of Contents for Hakko Electronics FX-100

  • Page 1 American Hakko Products, Inc. Menus and Settings Now that you have a HAKKO FX-100 Soldering Station, you may feel like you want to customize the settings of your soldering station. There are some options that may interest you and your can access these through the three buttons you see in the front of the soldering station under the display.
  • Page 2 American Hakko Products, Inc. SHOW PROFILE – is an option that allows you to view information you can program into the soldering station which includes a Soldering Station ID or other form of asset ID, a User Name, and Solder Type. The information will appear on the display for 10 seconds or until any of the three buttons are pressed.
  • Page 3 American Hakko Products, Inc. If you select the MANUAL SET option, you will then be shown a list of power ranges – 1, 2, and 3. One is the highest power range tip with a self-regulated tip temperature of 450°C / 840°F. Two is the next highest power range tip with a self-regulated tip temperature of 400°C / 750°F.
  • Page 4 American Hakko Products, Inc. Sleep functions have become standard on all high performance soldering stations as a method to help prolong the service life and reduce oxidation of soldering iron tips. AUTO SHUTOFF – is a setting option that allows you to set the amount of time the soldering iron will need to remain idle in the sleep holder until the soldering station automatically turns the power to the soldering iron off instead of just reducing the power and making it ‘go to sleep’.
  • Page 5 American Hakko Products, Inc. finished entering the Station ID and have not used all 15 spaces, hold the OK button for at least 3 seconds to accept the value and return you to the SETTINGS screen where you can make further changes.

Table of Contents