Page 3
Part Name Specifications Item No. Part No. Item No. Part No. Part Name Specifications Front panel assy. B3732 B2419 Power cord, 3-wire 120V USA Case/Left With rubber feet B3255 cord & American plug Case/Right With rubber feet B2978 B2421 Power cord, 3-wire Transformer 100V B2979...
Part No. Part Name Specifications B2756 Tip tray 2. PARAMETER SETTINGS The HAKKO FX-951 comes from the factory with The HAKKO FX-951 has the following six parameters: the following values preset. 1) °C or °F temperature display selection Temperature scale Fahrenheit...
2 Power save setting Set the time from the placement of the soldering iron on When the station enters the parameter input mode, the iron holder to the activation of the sleep function. the procedure is as follows. NOTE: Press the button once.
3. CHECKING PROCEDURE FM-2027 FM-2027 4. ERROR MESSAGES ● Sensor Error When there is the possibility that a failure has occurred in the sensor or heater (including the sensor circuit), is displayed and the power is shut down. CAUTION The sensor error also occurs if the tip is not inserted properly. ●...
Need help?
Do you have a question about the FX-951 and is the answer not in the manual?
Questions and answers