Siemens SIMATIC ET 200AL Manual page 27

Technical specifications
Article number
Errors/accuracies
Output ripple (relative to output range, band-
width 0 to 50 kHz), (+/-)
Linearity error (relative to output range), (+/-)
Temperature error (relative to output range),
(+/-)
Crosstalk between the outputs, max.
Repeat accuracy in steady state at 25 °C (rela-
tive to output range), (+/-)
Operational error limit in overall temperature
range
Voltage, relative to output range, (+/-)
•
Current, relative to output range, (+/-)
•
Basic error limit (operational limit at 25 °C)
Voltage, relative to output range, (+/-)
•
Current, relative to output range, (+/-)
•
Interrupts/diagnostics/status information
Substitute values connectable
Alarms
Diagnostic alarm
•
Diagnostic messages
Wire-break
•
Short-circuit
•
Diagnostics indication LED
Channel status display
•
for module diagnostics
•
Potential separation
between the load voltages
Potential separation channels
between the channels
•
between the channels and backplane bus
•
between the channels and the power sup-
•
ply of the electronics
Isolation
Isolation tested with
Degree and class of protection
IP degree of protection
26
6ES7145-5ND00-0BA0
0.02 %
0.1 %
0.005 %/K
-70 dB
0.03 %
0.25 % from 55 °C to -25 °C and 0.35 % to -30 °C
0.25 %
0.15 %
0.15 %
Yes; channel by channel, parameterizable
Yes; Parameterizable
Yes; channel-by-channel, only for output type
"current"
Yes; Actuator supply module by module; channel
by channel for output type "voltage"
Yes; Green LED
Yes; Green/red LED
Yes
No
Yes
No
707 V DC (type test)
IP65/67
Analog output module AQ 4xU/I 4xM12 (6ES7145-5ND00-0BA0)
Manual, 07/2019, A5E38687953-AB