How To
Change the Print Settings
At the Print Monitor page, press the Print Settings key to display the Print Settings page.
Then select the Message Orientation option to display the Message Orientation page.
Use the Up arrow key or the Down arrow key to highlight the required orientation. Then do
one of the following:
•
Press the OK key to save the setting and return to the Print Settings page. Then press
the Exit key to display the Print Monitor page.
•
Press the Cancel key to discard any changes and return to the Print Settings page.
2.1.9 Reset All Message Sequences
This option resets every sequential field in the Current Message to the start of the sequence.
The following field types are reset:
•
Sequential Number
•
Text Sequence (7900 only)
•
Orientation Sequence (7900 only)
This option is available in the 'IDLE' state and the 'JET RUNNING' state, but not in the
'PRINTING' state.
To Reset All Message Sequences:
At the Print Monitor page, press the Print Settings key to display the Print Settings page.
Then select the Reset All Message Sequences option.
9
Figure 5. Message Orientation page
Page 8 of 9
69116
FA69335–3 English
Sep 2014