When Idle For A Long Time; Further Information - Panasonic F-PZT175H Operating Instructions Manual

Hide thumbs

Table of Contents

MAINTENANCE

After replacing the filter, record the date installed on the label that came with the filter and attach

it to the body, cover the previous date record. (Page 8 )

Connect the power, press

indicator turns off, and the reset is completed.

Notice

The filter which needs to exchange cannot be used again even is cleaned, please dispose it as

non-flammable garbage.

If the product is used in a room (especially hotel) with strong odor such as aromatic smell, cigarette

smoke or barbecue smell, these odors may adhere to the filter, when the adsorption capacity of the

filter reaches saturation, odor will also be blown out again with the wind because of excess

adsorption. When there is above situation, please clean the composite and deodorizing filter. If the

situation persists, please replace composite and deodorizing filter, even if the filter replacement

indicator is off. In addition, if often used in a room with strong odor, please open the windows to

ventilate the room regularly.

Disconnect power after turning off the product. (The product still consumes power even at rest.)

Maintain the product as usual.

FURTHER INFORMATION

nanoe

can be switched off.

During operation, press

nanoe

indicator lights off) Press the buttons for about 3 seconds again to restart the nanoe

(nanoe

cannot be set during product stops operating.)

nanoe

Conditions for

nanoe

is generated by using the air in the room. Therefore, due to the differences in temperature

and humidity nanoe

Room temperature: about 5

Relative humidity: about 30% 85%

When nanoe

is generated, small amount of ozone will be released. However, the quantity will be

far less than the level in natural environment such as forest, and not be harmful to human beings.

nanoe

Filter replacement

and

simultaneously for about 3 seconds, the filter replacement