Faq - Panasonic F-PZT175H Operating Instructions Manual

FURTHER INFORMATION
When the movement of a person or pet is detected, the air volume is automatically adjusted. When
the generation of indoor dust is predicted, the product starts operating before the indoor air pollution
spreads. (When the air volume is set to auto.) (Not all pet movements can be detected.)
The sensor sensitivity is adjustable. (The factory setting is "normal sensitivity".)
When the product stops operating, press and hold
control buttons and the filter replacement indicator light on, and the air volume indicator flashes.
Under such condition, each time you press
switch once in the order as shown in the following figure. The setting will be automatically saved
within about 15 seconds after the selection is completed. Now the setting is completed.
High sensitivity
Normal sensitivity

FAQ

Please confirm the following before you put questions forward or send the product for repair.
Why is a "jee" sound from
the emission outlet?
There is a slight sound when nanoe
is being generated. Depends on the
environment and operation mode, the
sound may be a bit loud or inaudible
but it is not abnormal.
nanoe X
®
About human sensor
"
3
PM2.5
/
No human
activity sensing
" "
X
®
for about 3 seconds. At this moment, all the
, the PM2.5 concentration/timer display window will
")
Detection range
At a room temperature
of 25 :
25
The sensing distance
is about 2.5 m
2.5 m
The sensing angle is
about 150°
150°
Why does the clean sign light off
during operation?
Since the light sensor detects that the
indoor brightness goes dim, the brightness
of the indicator is automatically adjusted.
(P. 20)
15
150°
20
21