Filter Replacement; When Idle For A Long Time - Panasonic F-P16X8C-ES Operating Instructions Manual

Hide thumbs

Table of Contents

MAINTENANCE

維護保養

Replacement period

更換週期

※Depends on the level of air pollution, time taken for the filter replacement indicator lights up is

different. The filter replacement indicator is set according to the collection of particles by the filter,

when the collection capacity of the particles reduces to a certain level, the indicator is on. The

indicator setting is not related to the odor.

※根據使用環境污染程度等的不同，過濾網更換指示燈亮起的時間也會不同。濾網更換指示燈是根據濾網對固體

顆粒物的收集情況而設定的，當固體顆粒物的收集達到一定的程度後收集能力降低時，將提示濾網更換。指示

燈對氣味是沒有設置更換提示的。

After replacing the filter, record the date installed on the label that came with the filter and attach

it to the body, cover the previous date record. (Page 7 )

更換過濾網後，請在過濾網隨附的標籤上記錄開始使用日期，並將其粘貼在機體上，覆蓋舊的使用日期。(第7頁)

Connect the power, press

indicator turns off, and the reset is completed.

接通電源，同時觸摸

Notice

提示事項

The filter which needs to exchange cannot be used again even is cleaned, please dispose it as

non-flammable garbage.

即使清潔乾淨，達到更換週期的過濾網也不可再被使用，請將它作為不可燃垃圾處理。

If the product is used in a room (especially hotel) with strong odor such as aromatic smell, cigarette

smoke or barbecue smell, these odors may adhere to the filter, when the adsorption capacity of the

filter reaches saturation, odor will also be blown out again with the wind because of excess

adsorption. When there is above situation, please clean the

If the situation persists, please replace

replacement indicator is off. In addition, if often used in a room with strong odor, please open the

windows to ventilate the room regularly.

如果在有芳香劑、香煙或烤肉等氣味濃烈的環境下(特別是酒店)使用，異味有可能會附著在過濾網上；當過濾網

的吸附能力達到飽和後，氣味也會因吸附過盈而隨風再次被吹出。當發生以上情況時，請對集塵脫臭過濾網進行

維護保養；若保養後仍有異味吹出，即使過濾網更換指示燈沒有亮起也請更換集塵脫臭過濾網。另外，若經常在

氣味濃烈的環境下使用，建議定期針對室內開窗進行通風換氣。

When idle for a long time

Disconnect power after turning off the product. (The product still consumes power even at rest.)

停止運轉產品並拔出電源插頭。（因為停止運轉時也耗電。）

Maintain the product as usual.

需進行維護保養。

Cover the product with a poly bag, and keep it in a dry place. (If you overturn it or keep it flat,

product malfunctions may occur.)

蓋上塑膠袋並存放於乾爽處。（倒置或平放可能會導致產品發生故障。）