Table of Contents
Advertisement
SETUP
Install filters
Close the front panel (2 pcs) slowly.
(6)
2
Notice
Make sure the front panel is closed in the position.
Close the front panel lock cover (2 pcs).
(7)
OPERATION
This product adopts touch screen operation, contact area is as large as possible when using finger
to press (if contact area is too small, may result in no response after touch).
If power is disconnected while operating, when it is connected again, the product will automatically
restart and operate in the mode it was in when power was lost.
10
Front panel
2
Front panel lock cover
Front panel
Timer button PM2.5 button
PM2.5
Silent Auto button
Power-on
Power-on.
When connecting power, the odor sensor
takes this moment as the baseline for the
level of cleanliness, so it is recommended
when the air in the room is clean (such as
when there is no cigarette smoke).
(the odor sensor baseline is updated
automatically depending on the level of
cleanliness in the room)
Power on, PM2.5 concentration / timer
display window shows PM2.5 concentration.
PM2.5
PM2.5
press
, and the "clean sign" blinks about
5 seconds.
Power off/on button
Air volume button
5
Advertisement
Table of Contents
