Setup - Panasonic F-PZT175H Operating Instructions Manual

MAIN PARTS IDENTIFICATION
nanoe indicator
®
nanoe
®
The indicator lights on indicates
nanoe is being generated.
®
nanoe will be generated in all
®
operation modes except you switch off
it. (P.18)
nanoe
®
( 18 )
Notice
You can touch and hold
concentration/timer display window and the lit indicators (except for the lit control buttons and
air volume indicator); touch and hold them again for about 3 seconds to turn them back on.
3

SETUP

Before startup
Fill in the label with
the first date of use.
Replacement composite and deodorizing filter
Notice
Make sure to read page 2 to 4
before setting up the product.
8
nanoe
®
nanoe
®
and simultaneously for about 3 seconds to close the PM2.5
3 PM2.5
Press the front panel lock cover (2 pcs) with both fingers at
(1)
the same time.
Notice
When opening the front panel lock cover, the opening angle
shall not be greater than 90 degrees. Otherwise it may get
damaged.
Hold the front panel locks with your finger and open the
(2)
front panel (2 pcs).
2 ~ 4
Human sensor indicator
This indicator lights on to indicate that the
human activity sensor is sensing.
(When the product stops operating, the
control panel does not display this indicator.)
(
Install filters
Installing composite and deodorizing filter.
Front panel lock cover
2
90°
2
Front panel lock