Synchronization; Input Specification; Dvi-I; Display Port 1.2 - Barco F70 Series User Manual

2. Input Modes
Input 1
Input 2
Image 2-2
Passive stereo input principle
Source setup
Refer to the manual for the specific graphic source.
Select passive stereo display mode
2.2

Synchronization

There are two sync inputs in use in the Pulse projector 3D mode.
• Mini-DIN connector: Output sync for the 3D glasses. 5V , 765mA nom, available in the connector. Suitable for supplying the
IR emitter for the 3D goggles.
• BNC Sync port 1. Bidirectional. For sync signal from source.
2.3 3D input specification.
2.3.1

DVI-I

Specifications
Parameter
Connector
Signal characteristics
Max. cable length
Max. pixel rate
Scan format
Max. input data resolution
Bit depth
EDID
HDCP
2.3.2

Display Port 1.2

Specifications
Parameter
Connector
Signal characteristics
Functionality
Max. cable length
8
Dual input
(Passive stereo)
Value
DVI-I female digital RGB
DVI 1.0, Digital, TMDS
25 m (24 AWG)
330 MHz (dual link), 165 Mhz (single link)
Progressive
1920x1200 60Hz (Single link), 2560x1600 60Hz (Dual
Link).1920x2400 @60Hz
8 bit
Supported
Supported
Value
Standard Display port
DP 1.2
Mandatory
15 m (24 AWG) - RBR;
2 m (24 AWG) – HBR1, HBR2
601–0469 3D FUNCTIONALITY PULSE PLATFORM 27/02/2018