Seco Q7-C25 User Manual page 13

2.1 Introduction
The Q7-C25 is a Q7 Rel. 2.1 compliant module with NXP i.MX 8M Applications Processors. Featuring multicore processing (Dual or Quad ARM Cortex®-A53 cores
+ general purpose Cortex®-M4 processor) and 4Kp60 HEVC decoding with HDR, it is a scalable solution designed by SECO for home automation, transportation,
digital signage and vending machines, and applicable to scenarios requiring advanced security, connectivity, multimedia and real-time response.
The module offers a very high level of integration, both for all most common used peripherals in the ARM domain and for bus interfaces typically used in the x86
domain, like PCI-Express.
Presented in the Q7 form factor, offering the computing abilities of a standard board, with the possibilities of combining with a ready-to-use carrier board like the
SECO CQ7-A42 or customised carrier board.
For external interfacing to standard devices, a carrier board with a 230-pin MXM connector is needed. This board will implement all the routing of the interface signals
to external standard connectors, as well as the integration of other peripherals/devices not already included in Q7-C25 module.
Q7-C25
Q7-C25 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Authors: S.B. and A.R - Reviewed by N.P. - Copyright © 2020 SECO S.p.A
13