Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Kohler Manuals
  4. Plumbing Product
  5. COUTURE ECO-LITE
  6. Installation instructions manual

Kohler COUTURE ECO-LITE Installation Instructions Manual

Reverse trap toilets
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
BEFORE YOU BEGIN
HOW TO USE THESE INSTRUCTIONS
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your partic-
ular installation. This will help you avoid costly mistakes.
In addition to proper installation, read all operating and
safety instructions.
NOTES
S
Seat post holes on 5-1/2" centers.
S
Water depth from rim is 6-3/4".
S
1-3/4" passageway.
S
Ensure that the new toilet has the correct
roughing-in dimension. The K-3471-K and
K-3472-K have a 12" roughing-in dimension. See
Fig. #1.
S
Be very careful while working with vitreous china
products. Vitreous china can break and chip if
you overtighten bolts and nuts or carelessly
handle the product.
S
Carefully inspect the new fixture for any sign of
damage.
S
Observe all local plumbing and building codes.
S
Shut off the water supply.
S
For new construction, refer to the dimensions in
Fig. #1 and Fig. #4 for locating the shut-off valve.
S
Fixture dimensions are nominal and conform to
tolerances by ANSI Standards (A112.19.2).
WARNING: Risk of personal injury or product
damage. Handle vitreous china products very
carefully. Vitreous china can break and chip if you
overtighten bolts and nuts.
WARNING: Risk of external leakage. The fill
valve nut has been factory-tightened to design
specifications. If re-tightening is required, wrench
tighten one turn past finger tight.
CA
114107-2-
(B)
R
1 1
COUTURE ECO-LITE
VITREOUS CHINA
REVERSE TRAP TOILETS
All information in these instructions is based on the latest
product information available at the time of publication.
Kohler Co. reserves the right to make changes in product
characteristics, packaging, or availability at any time with-
out notice.
These instructions contain important care, cleaning, and
warranty information – please leave instructions for the
consumer.
ORDERING INFORMATION
Couture Eco-Lite Toilet (elongated)
Couture Eco-Lite Toilet (round front)
When specified:
3/8" supply
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
5/16" floor bolts (pr.)
. . . . . . . . . . . . . . . . . . . . .
. . . . . . .
K-3471-K
. . . . . .
K-3472-K
K-7637
21401
E1998 Kohler Co.

Advertisement

loading

Related Manuals for Kohler COUTURE ECO-LITE

Summary of Contents for Kohler COUTURE ECO-LITE

  • Page 1 Follow the sections that pertain to your partic- Kohler Co. reserves the right to make changes in product ular installation. This will help you avoid costly mistakes. characteristics, packaging, or availability at any time with- In addition to proper installation, read all operating and out notice.
  • Page 2 See Page 3.) ROUGHING-IN 7/8” 18-5/8” FRONT OF BOWL 32-7/8” 4-1/4” 15” 9” 12” 4-1/2” 3/8” I.P.S. SUPPLY C OF OUTLET .9<116 Fig. #1 Roughing-In Notes K-3471-K/KU 29-1/2” 15-5/8” 6-1/8” 9-1/2” K-3472-K/KU 27-1/2” 14-1/8” 6-3/16” 9-3/4” Kohler Co., Kohler, WI 114107-2-...

  • Page 3: Installation

    4-1/2” to the left of the centerline of the closet 9” flange. The centerline of the supply shut-off outlet should extend 4” from the finished wall. Install the supply shut-off valve 12” with the outlet vertical. Fig. #4 Kohler Co., Kohler, WI 114107-2-...
  • Page 4 Overtightening may cause breakage or chipping. Washer Alternately tighten the three brass hex nuts so that the top of the tank is level with the top of the bowl, and a watertight seal is obtained. Fig. #7 Kohler Co., Kohler, WI 114107-2-...
  • Page 5 Long Long Flush If the two arms are not in alignment, turn the adjustment Flush Chain Adjustment screw until the arms line up. Screw Long Flush Short Flush Chain Attachment Short Flush Attachment Fig. #10 Kohler Co., Kohler, WI 114107-2-...
  • Page 6 There should be no more than four extra beads at the top of each trip arm. Cut off any excess. 1.1 Gallon Flush Position Slack In 1.1 Gal. Flush Chain Note Cam Position Water Levels 1.6 Gallon Flush Position Fig. #12 Kohler Co., Kohler, WI 114107-2-...

  • Page 7: Troubleshooting Chart

    See Page 6. 10. Poor A. Adjustment screw is not properly adjusted. A. Turn handle adjustment screw to obtain acceptable handle alignment – clockwise to handle lower end of flush handle; counterclockwise to alignment. raise end. Kohler Co., Kohler, WI 114107-2-...

  • Page 8: Important Consumer Information

    Most toilet bowl cleaners are not harmful to the vitreous Kohler Company shall not be responsible or liable for any china surface of the toilet bowl. Please follow the bowl damage to these tank fittings caused by the use of cleaner manufacturer’s instructions carefully.