ST STM32Cube Quick Start Manual page 9

• Full-Duplex audio streaming between two STM32WB (P-NUCLEO-WB55 or STM32WB5MM-DK)
•
2x P-NUCLEO-WB55 development board + 2x X-NUCLEO-CCA02M2 expansion board; alternatively, 2x STM32WB5MM-DK
•
Laptop/PC with Windows 7, 8 or 10 and Audacity or other audio recording sw
•
2x micro-USB cables
• Full-Duplex audio streaming between STM32WB (P-NUCLEO-WB55 or STM32WB5MG-DK) and a mobile device
•
1x P-NUCLEO-WB55 development board + 1x X-NUCLEO-CCA02M2 expansion board; alternatively, 1x STM32WB5MM-DK
•
Laptop/PC with Windows 7, 8 or 10 and Audacity or other audio recording sw
•
1x micro-USB cable
•
1x mobile device running ST BLE Sensor App (v4.9.0 or higher)
• Full-Band stereo music streaming:
•
1x P-NUCLEO-WB55 or 1x STM32WB5MM-DK
•
Laptop/PC with Windows 7, 8 or 10 and Audacity or other audio recording sw
•
1x micro-USB cable
•
1x mobile device running ST BLE Sensor App, supporting BLE 4.2 or higher
Setup & Application Examples
HW prerequisites for Full-Duplex demo between two STM32WB
9