Panasonic U-8ME2E8 Service Manual & Test Run Service Manual page 129

1. Simple Settings Function
<Procedure of CZ-RTC4>
1 Press and hold the
simultaneously for 4 seconds or longer.
2 " ", unit No. "
of group control), item code "
data " " are displayed blinking on the remote
controller LCD display. At this time, the indoor unit
fan (or all indoor unit fans in the case of group
control) begins operating.
3 If group control is in effect, press the
select the address (unit No.) of the indoor unit to set.
At this time, the fan at the indoor unit begins operating.
*If unit No. " " is displayed, the same setting
will be made for all indoor units.
4 Press the temperature setting
select the item code to change.
5 Press the timer time
desired setting data.
*For item codes and setting data, see the following
page.
6 Press the button. (The display stops blinking
and remains lit, and setting is completed.)
7 Press the
button to return to normal remote
controller display.
and buttons
" (or " " in the case
", and settings
button and
/ buttons to
/ buttons to select the
4
5
A
7
5 - 3
2WAY SYSTEM
Remote Controller Functions
°
°
1 6
2
3
5