Disassembly And Scrapping - Pronomic 90P Original Instructions Manual

5. Connect the power cable from cross-member to power pack. Connect the remote control if
needed.
6. Connect the power pack to main power
7. Perform a static load test, with 1.25 x the maximum load.
(Move the load carrier to the middle of the column and apply the load.)
8. The stationary lifter is now read for use.

2.1 Disassembly and scrapping

To disassemble the stationary lifter, follow the instructions in section Assembly, but in reverse
order.
When the stationary lifter is due for scrapping the machine should be handed in to a recycling
centre or Pronomic to ensure reuse and safe handling of all parts.
________________________________________________________________________________
4 – Stationary lifter (90/125/130/175/225P)