Trouble Shooting; Technical Specifications - Pronomic 90P Original Instructions Manual

5.3 Trouble shooting

The stationary lifter is designed for safe and efficient operation, provided that routine
maintenance is carried out in accordance with the instructions given. If problems arise, some
guidance is provided below. If the problem persists after action has been taken – Please contact
service technician or Pronomic.
If the load carrier does not move at all, or very slowly:
• Verify that the maximum load is not exceeded.
• Check the AC/DC converter.
If the lift trolley sounds strange:
• Make sure the stationary lifter is correctly assembled, see section Assembly.
• See section Maintenance.

6 Technical specifications

Model
Max-load
Voltage
Main voltage
Noise
Vibration
Test factor for static testing
________________________________________________________________________________
90P 125P
90kg 125kg
9 – Stationary lifter (90/125/130/175/225P)
130P
130kg
24 V DC
230 V AC 50 Hz or 115 V AC 60 Hz
The noise level does not exceed 70 dB(A)
Vibrations do not exceed 2.5 m/s
1.25
175P
175kg
2
225P
225kg