Maquet VENTA MULTI CARE 16 Operating Instructions Manual page 45

Medap septic fluid suction pump
Table of Contents

Advertisement

2
6
Fig. 32: Detaching the hydrophobic bacteria filter
8
Fig. 33: Removing the septic fluid jar.
9
Fig. 34: Removing the septic fluid jar cap
3
4
5
7
10
11
Operating instructions VENTA Multi Care 16_ 5752 2434
Empty the septic fluid jar
Disconnect the bacteria filter and tubes
Switch off the septic fluid suction pump.
Detach the connection tube(2) from the hy-
drophobic bacteria filter (3).
Detach the suction tube (4) from the patient-
side connector nipple (5).
Remove the hydrophobic bacteria filter (3)
from the septic fluid jar cap (6).
Remove the septic fluid jar.
Press against the septic fluid jar (7) from the
front.
Carefully slide the septic fluid jar (8) out to-
ward the rear.
Remove the septic fluid jar cap
Carefully grip the septic fluid jar cap (9) near
the patient-side connector nipple (10) and lift
the cap off the septic fluid jar (11).
Dispose of the extracted fluid.
Operation
5
39
GA 5752 2434 EN 13

Advertisement

Table of Contents
loading

This manual is also suitable for:

5752 27645752 2345

Table of Contents