To adjust the table position, press and hold the appropriate switch on the hand-held controller. The
tabletop will move or rotate in the direction indicated by the switch. Release the switch when the
tabletop achieves the desired position.
Using the Foot Controller
The Foot Controller activates all motions. The four separate rocker style pedals control two
movements each. From left to right on the Foot Control, press and hold down the appropriate
rocker switch to adjust Trendelenburg/Reverse Trendelenburg positioning, lateral roll, tabletop
height, and X-Y motion. Releasing the rocker switch at any time immediately stops the motion.
NOTE: When the table is used in a wet environment, it is recommended that the Foot Controller
be covered with a plastic bag and sealed as watertight as possible.
Note for Hand-Held and Foot Controllers:
NOTE: The table can perform only one motorized function (i.e. raising or lowering the
tabletop, lateral roll, X-Y movement, Trendelenburg/Reverse Trendelenburg) at a time. If
a second button on the Hand-Held Controller (or the Foot Controller) is pressed while
the table is already performing a motorized function the tabletop movement will stop.
At that point, all buttons must be released before the selected function can resume.
Figure 2.2. Hand-Held Controller
Figure 2.3. Foot Controller
12