Christie DS Series Service Manual page 12

5-2 Regarding the indicator lamps
The indicators may differ from the usual, check and deal with it according to the following table.
The indicators are described as below.
Lit
Blinking
Steady light
Indicator Status
Orange
Green
Green
Orange
(continued on next page)
Indicator Status
Blinking In Green 1 time
Normally lighting in Orange.
Blinking In Green 2 times for
approx. 3 seconds.
Blinking In Green 2 times
Green
Blinking In Green 3 times
Green
Green Green
(continued on next page)
LWU900-DS/LHD878-DS/LWU755-DS
Service Manual
LWU900-DS / LHD878-DS / LWU755-DS
Off
Description
The projector is in a standby state.
Refer to the section "Power on/off".
The projector is warming up.
Wait for the projector to warm up.
The projector is in an on state.
Ordinary operations may be performed.
The projector is cooling down.
Wait for the projector to cool down.
Description
At least 1 "Power ON" schedule is saved to the
projector.
Please refer to Schedule Settings section of User's
Manual - Network Guide.
STANDBY MODE is set to QUICK START.
Refer to STANDBY MODE.
Blank(black) or AV Mute(black) is on.
Press any button on the remote control or on the
control panel to disable Blank or AV Mute.
The temporarily shading the screen is
enabled.
Press the SHUTTER button on the remote control
or on the control panel to disable temporarily
shading the screen.
The projector received the remote control
signal when ALL is selected for REMOTE
CONTROL in KEY LOCK.
CONTROL PANEL was operated when ALL is
selected for CONTROL PANEL in KEY LOCK.
11
020-001586-01 Rev. 1 (02-2021)
LIT MAN SERV DS Series