Christie DS Series Service Manual page 107

10-10 Setup of the projector
The following contents are also described in User's manual.
 ZOOM / FOCUS
1. The ZOOM or FOCUS dialog will appear when you press any of the buttons from ZOOM, ZOOM
-, ZOOM +, FOCUS, FOCUS + and FOCUS -.
2. Use the ZOOM + / - buttons on the remote control or ZOOM button and ◄/► cursor buttons on
the projector to adjust the screen size.
3. Use the FOCUS + / - buttons on the remote control or FOCUS button and ◄/► cursor buttons
on the projector to focus the picture.
 LENS SHIFT
Press the LENS SHIFT button on the projector or the SHIFT button
on the remote control to display the LENS SHIFT menu. Press the ►
or ENTER button to select LENS SHIFT, then shift the lens with the
▲/▼/◄/► buttons. Generally, better image quality can be got when
the lens is set to the center.
Press the ◄ or ENTER button to go back to menu selection. To exit
the LENS SHIFT function, press the LENS SHIFT button while LENS
SHIFT menu is displayed.
 CENTERING
< With the LENS SHIFT menu>
Select CENTERING in LENS SHIFT menu and press the ► or ENTER button to execute the CENTERING
feature which adjusts the lens to the center. A message dialog is displayed for confirmation. Pressing the
►button performs CENTERING. You can also perform CENTERING in the standby mode by pressing the
INPUT and LENS SHIFT buttons on the control panel for three seconds at the same time.
< In the standby mode>
Press the LENS SHIFT and the INPUT buttons for 3 seconds at the same time.
• While the lens is moving to the center, the menu disappears and an hourglass icon appears on
the screen. CENTERING may take some time till the lens reaches the center.
• The projector may ignore operation by buttons while moving the lens.
• The CENTERING feature while the projector is in the standby mode is disabled if the STANDBY
MODE item of SETUP menu is set to NETWORK-WOL or POWER SAVE. Perform CENTERING
before the projector's power is turned off, or set the STANDBY MODE to NORMAL or QUICK
START.
• The adjustable range of LENS SHIFT varies depending on the lens unit mounted on the projector to
maintain picture quality. Therefore, LENS SHIFT adjustment may not reach the end of the indicator
in the dialog. This is not a failure.
LWU900-DS/LHD878-DS/LWU755-DS
Service Manual
LWU900-DS / LHD878-DS / LWU755-DS
106
NETWORK INTERACTIVE
INFO
020-001586-01 Rev. 1 (02-2021)
LIT MAN SERV DS Series