Replacement Of Power Unit - Sony DVS-7200A Maintenance Manual

2-2. Control Panel

2-2-5. Replacement of Power Unit

2-2-5. Replacement of Power Unit
w
Allow for more than five minutes interval after turning the power off, remove the power unit.
To avoid shock hazards, never remove the power unit just after turning the power off.
(1) Open the panel. (Refer to the section 1-2-1.)
(2) Turn off the power switch in the control panel. (Refer to the section 1-2-2.)
(3) Remove the two screws securing the power unit.
(4) Tilt the levers at both sides of the power unit in the direction of the arrow.
(5) Lift up the power unit in the direction of the arrow 1. (Only for BKDS-7015)
(6) Remove the power unit in the direction of the arrow 2.
BKDS-7015
Lever
PS3 x 6
PS3 x 6
Levers
2
1
Power unit
2-12
DVS-7200AE MMP1