Sony DVS-7200A Maintenance Manual page 60

2-2. Control Panel
2-2-1. Replacement of Rotary Encoder
3. Display Panel (BKDS-7025/7026)
(1) Remove the four knobs.
(2) Remove the exterior part of the display panel. (Refer to the section 1-2-3.)
(3) Remove the KY-323 board. (Refer to "15. KY-323 Board" in the section 1-2-5.)
(4) Remove the two screws and the VR bracket.
(5) Remove the nut of the rotary encoder to replace.
Rotary encoder
BVWH3 x 8
Knobs
VR bracket
BVWH3 x 8
Nut
(6) Install a new rotary encoder in the reverse order of the procedures (1) through (5).
2-6
DVS-7200AE MMP1