Replacement Of Fader - Sony DVS-7200A Maintenance Manual

2-2-2. Replacement of Fader

(1) Turn the fader grip of the fader to replace in the direction of the arrow and remove it.
(2) Open the panel. (Refer to the section 1-2-1.)
(3) Turn off the power switch in the control panel. (Refer to the section 1-2-2.)
(4) When removing the fader (BKDS-7030) with installed to the adaptor box (BKDS-7075), remove the
two screws and the AD panel. (Refer to "2. Adaptor Box" in the section 1-2-3.)
When removing the fader in the main panel, remove the CPU-246 board or the CPU-263 board.
(Refer to "5. CPU-246 Board" or "6. CPU-263 Board" in the section 1-2-5.)
n
When removing the fader on the KY-391 board, it is not necessary to carry out the step (4).
(5) Disconnect the one connector.
For KY-320, 321, 367, 391, 392 or 411 Board : CN13
For KY-328 Board :
(6) Remove the four screws securing the fader to replace.
PWH3 x 5
PWH3 x 5
(7) Install a new fader in the reverse order of the procedures (1) through (6).
DVS-7200AE MMP1
CN12
Only KY-328 board
(BKDS-7030)
CN12
Fader assembly
Fader grips
CN13
2-2. Control Panel
2-2-2. Replacement of Fader
2-7